My blog postings usually describe my Work in Progress activities, but I will occassionally post interesting event notices or other items related to this website. Subscribe to my blog to receive an email when I post new work.
So, here are my casting results. The first picture shows my four flasks after they come out of the kiln when the wax is melted. The flasks are set on a rack in a pan and heated to 150 C for two to three hours in that blue thing (the kiln) on the bench. The wax […]
Having finally finished making the silicon moulds and taking wax copies of the parts I’m anxious to get this ready to cast. I always find I get a little excited when I first cast a new figure. It’s like I can’t wait to see how it turns out! So, I want to get this done. […]
Hi folks, So I’m back. I’ve made silicon moulds for all the parts in this kit and created wax copies of all the parts. The pictures below shows all the silicon moulds and all the wax parts. You can see where there is flashing and extra wax that leaked out between the two halves of […]
Here are a few pictures of the second half of my two part mould. The next day after the first half is set I unstick them from the base, turn them over, and remove the modelling clay. The forms are repositioned and the second half of silicon rubber is measured and poured. The real […]
Someone said that I had a wonderful workspace and that they’d love to have as much room to make a mess! Yes, my workspace was originally the previous house owner’s wine room. He was an Italian barber, and one thing about Italy is that the whole boot is supposedly overflowing with wine. I think it […]
Someone recently said that I should do a bronze cast of 7 of 9 from the Star Trek: Voyager series. Apparently, she was the reason many watched the show? I was told that if I was to cast her in bronze then people would buy her. But, I’ve never found a resin kit of this […]
I like to play with molten metal and cast bronze anime figures in my workshop. Unfortunately, I have not yet figured out how to make my creations come alive. So, in the interim we can look at cute dancing animated figures. Vocaloids are created with innovative Miku Miku Dance software that was developed in Japan […]
This post describes etching the Julia Set images for my Mandelbrot Cube. Each cube face is about two inches square and made from 20 gauge sheet brass. Etching requires that a mask or resist be put on the metal to stop the etching acids or salts from reacting with the areas that are to be […]
The Mandelbrot Cube project is a fascinating exploration of fractal mathematics. Fractals are functions such that whenever you look deeper into a section of the curve you see repetitions and self-similarities to what you first started with. Fractals are recursive and iterative and chaotic. And, they are truly beautiful. For the bronze figure in this […]
This post shows the fabrication of the Archimedean spiral that begins the famous Yellow Brick Road in the Wizard of Oz. I am using 24 gauge copper sheet for the base and 24 gauge yellow brass sheet cut into a spiral for the road. My design drawing was transferred to the metal with pencil and […]
